300 Remington Ultra Mag Full Length Die Set (Series A)

Brand: Redding
Product Code: 80288
Price: £56.87
login to save in wishlist
Details

Rifle and Handgun Die Sets - Series A Die Set For Bottle Neck Cases. Full length die sets for bottleneck cases contain two dies. The full length (FL) resizing die contains a decapping rod assembly with a neck expander (size button). The seating die (ST) includes bullet guide, built-in crimp ring and the proper seating plug.

Other Products By Redding
Reloading Press The Big Boss II

The Big Boss and Big Boss 2 Reloading Presses. These top of the line single station presses have the largest window opening and longest usable ram stroke of any in their class. Both the original Big Boss and the new Big Boss II reloading presses have all the desirable features of the “Boss” reloading press, but are built on heavier frames with a 1” diameter ram and longer 3.8” usable ram stroke for reloading the largest magnum cartridges. The Big Boss II now features the unique Redding “Spent Primer Collection System” used on the T-7 and Ultramag presses. This top of the line single station press has the largest window opening and longest usable ram stroke of any press in its class. Simply, the only press you will ever need!

219.03
308 Winchester Type S - Match Bushing Full Die Set (Cat 1)

Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The new Type S - Full Length Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding. Uses the same interchangeable bushings (.001" increments) as those used in our bushing style neck sizing dies. The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desired. Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case. All Type S (except 17 and 20 Cal.) dies are supplied with both the standard size button and a decapping pin retainer for the advantages and versatility described under our Type S - Bushing Style Neck Sizing Dies. Note: By removing the bushing and all internal parts, the Type-S full bushing die may also be used as a body die. All dies are supplied without bushings. Contains Type S – Bushing Full Sizing Die and Competition Seating Die.

150.12