Rifle and Handgun Die Sets - Series B Die Set For Straight Wall Cases. Full length die sets for bottleneck cases contain two dies. The full length (FL) resizing die contains a decapping rod assembly with a neck expander (size button). The seating die (ST) includes bullet guide, built-in crimp ring and the proper seating plug.
The Model #1400-XT Case Trimming Lathe uses a cast iron frame that has been extended to handle all the latest long action cartridges. The frame is cast iron because it is a perfect bearing surface, will not wear out and will maintain its p recision and alignment for years of service. Supplied with: Universal collet fits all popular cases, TiN (Titanium Nitride) coated replaceable cutter, Six pilots - .22 cal., 6mm, .25 cal., .270 cal., 7mm and .30 cal, Two neck cleaning brushes (.22 thru .30 cal.), Large and small primer pocket cleaners.
The Type S - Bushing Style Dies, Competition Seating and Neck Sizing Dies, Body Dies and our New Competition Shellholders are all products of Benchrest and 1000 yard Competition. The new Type S - Bushing Style Neck Sizing Die provides reloaders with a simple means to precisely control case neck size and tension. Uses interchangeable sizing bushings available in .001" increments. The adjustable decapping rod allows positioning the bushing to resize only a portion of the neck length if desired. Concentricity is enhanced by the ability of the resizing bushing to selfcenter on the case neck. The decapping rod is supplied with a standard size button. This is especially useful for reloaders who are using commercial brass as is. A decapping pin retainer is also supplied with most Type S - Bushing Dies except 17 and 20 Cal. This enables neck sizing without the use of the size button for those who sort and/or turn case necks for uniformity. All dies are supplied without bushings. Set Contains Type S – Bushing Neck Sizing Die, Body Die and Regular Series 92000 Seating Die.