Wheeler 8 piece Steel Pin Punch Set

Brand: Wheeler Engineering
Product Code: 715055
Price: £13.19
login to save in wishlist
Details

Quality crafted Steel Punch Set assists the gunsmith in assembly and disassembly of all kinds of firearms. Reduce the chances of marring and burring that can occur with improperly sized or makeshift punches. The steel set contains eight precision crafted pin punches in sizes you can use. Steel: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16". Handy rollup pouch keeps your punches clean and in order. Overall length 4".

Other Products By Wheeler Engineering
Wheeler Professional Gunsmith Screwdriver set - 72 piece

Screwdrivers are the most important and most-used gunsmithing tools. Wheeler's Deluxe Gunsmithing Screwdriver Set is the kit that belongs on every gunsmithing bench - the well thought-out bit selection will put an end to burred, buggered, busted up screw slots on any gun that comes your way. The bits make up the heart of any screwdriver set, and Wheeler's are the finest available. They're made from S2 tool steel and hardened to 56-58 Rockwell "C." Unlike other screwdriver suppliers,Wheeler's engineers measured the screws on over one hundred modern and antique firearms to make sure that we offered bits for every situation. Keep your gun looking and operating as good as new! Avoid costly damage that ruins the look and value of your guns! Whether you're working on a Browning Superposed, a Remington 700, a Smith & Wesson revolver, or a Colt Single Action, you'll find that there's a bit to fit every screw on your gun. The 54 Hollow-ground flat bits range in size from .120"x.020" to .360"x.070", and includes doubles in the thinnest sizes. (Any gunsmith will tell you that you're occasionally going to break the ultra-thin bits on stubborn screws. This set includes two each of the very thinnest bits, which means you'll never be stuck in the middle of a job without the proper bit). The set also includes a complete selection of Phillips, Allen, and Torx bits to cover scope rings, bases, recoil pads, and the like. The difference in the "basic set" and the "professional set" lies in the 15 ingenious "specialty bits" that are included in the "professional" set. These 15 pieces include all of the bits pictured below. These bits are great for installing scope bases, getting you out of a pinch by providing a small pin punch when you really need it, and keeping once-in-a-while lifesaver tools at your fingertips. Both sets come with two handles made from comfortable overmolded plastic. The first is a regular size handle that's good for most jobs, and the second is a slimmer, shorter "Close Quarters" handle that is good for finesse work with smaller bits. Both sets also come in a durable custom box that's ready for the bench or your range kit.

73.38
Wheeler Ring Align / Lap Kit 30mm

Aligning and lapping of new rings should become the standard practice whenever a scope is installed on a quality firearm. The alignment bars in this kit provide for perfect alignment of both rings and will also diagnose any misalignment problem, vertical or horizontal, giving you the opportunity to fix the problem before damaging the scope or experiencing frustration at the range. The lapping bar is used to lap the rings to improve alignment, reduce stress on the scope and improve the grip of the rings on the scope. It also serves as a lever to rotate dovetail rings into place. Lapping the rings can also minimize or prevent ring marring of the scope. Kit includes: Two 30mm alignment bars, 30mm lapping bar, lapping bar handle, 220 grit lapping compound, complete instructions.

0.00